Pioneer PRS-D1200M Owner's Manual - Page 17
Specifications - rms
UPC - 012562891699
View all Pioneer PRS-D1200M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Specifications Power source ...14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ...Negative type Current consumption ...39 A (at continuous power, 4 Ω) Average current drawn* ...12 A (4 Ω for one channel) 20 A (2 Ω for one channel) 28 A (1 Ω for one channel) Fuse ...40 A × 2 Dimensions ...301 (W) mm × 57 (H) mm × 213 (D) mm [12 (W) in. × 2-1/4 (H) in. × 8-3/8 (D) in.] Weight ...3.5 kg (7.7 lbs.) (Leads for wiring not included) Maximum power output 800 W × 1 (4 Ω) / 1 200 W × 1 (1 Ω to 2 Ω) Continuous power (14.4 V NORMAL mode: 4 Ω, 20 Hz to 240 Hz, 1.0% THD, 400 W × 1 2 Ω, 100 Hz, 1.0% THD, 600 W × 1 HI-CURRENT mode: 4 Ω, 20 Hz to 240 Hz, 1.0% THD, 150 W × 1 2 Ω, 100 Hz, 1.0% THD, 300 W × 1 1 Ω, 100 Hz, 1.0% THD, 600 W × 1 Load impedance ...4 Ω (1 Ω to 8 Ω allowable) Frequency response ...10 Hz to 240 Hz (+0 dB, -3 dB) S/N ratio ...92 dB (IHF-A network) Distortion ...0.5 % (10 W, 100 Hz) Low pass filter ...Cut off frequency: 40 Hz to 240 Hz Cut off slope: -18 dB/oct Subsonic filter (HPF) ...Frequency: 20 Hz Slope: -18 dB Bass boost ...Frequency: 50 Hz Level: 0 / 6 / 9 / 12 dB Gain control ...RCA: 400 mV to 6.5 V SP: 1.6 V to 26 V Maximum input level / impedance ...RCA: 6.5 V / 22 kΩ SP: 26 V / 90 kΩ Power output NORMAL mode: 400 W RMS × 1 channel (at 4 Ω and 1% THD+N) 600 W RMS × 1 channel (at 100 Hz , 2 Ω and 1% THD+N) HI-CURRENT mode: 150 W RMS × 1 channel (at 4 Ω and 1% THD+N) 300 W RMS × 1 channel (at 100 Hz , 2 Ω and 1% THD+N) 600 W RMS × 1 channel (at 100 Hz , 1 Ω and 1% THD+N) S/N ratio 66 dBA (reference: 1 W into 4 Ω) Note: • Specifications and the design are subject to possible modification without notice due to improvements. *Average current drawn • The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. 16