Pioneer PRS-D1200SPL Owner's Manual - Page 13
English, EspaÑol, Deutsch, FranÇais, Italiano, Nederlands
UPC - 012562858906
View all Pioneer PRS-D1200SPL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH Two Amplifier (Ex. Bridge) Connect to a car stereo. MODE SELECT switch SYNC OUTPUT must be in MASTER position. For details, see the "Connection Diagram". ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS MODE SELECT switch must be in SYNC INV position. Before setting to the position, remove SYNC the screw and the stop- INPUT per. Connecting wire with RCA pin plugs (sold separately). Connecting speaker wire (sold separately). 2 Ω to 16 Ω 2 400 W (2 Ω) • Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple speakers with a bridge, check that the synthetic impedance is at least 2 Ω. Two Amplifier MODE SELECT switch must be in MASTER position. Connect to a car stereo. SYNC OUTPUT For details, see the "Connection Diagram". MODE SELECT switch must be in SYNC position. Before setting to the posi- tion, remove the screw and SYNC the stopper. INPUT Connecting wire with RCA pin plugs (sold separately). 1 Ω to 8 Ω 1 200 W (1 Ω) • Use speakers having an impedance from 1 Ω to 8 Ω. 1 Ω to 8 Ω 1 200 W (1 Ω) 12