Pioneer PRS-D2200T Owner's Manual - Page 10

ACoTnintlec(tEinnggtlhisehU) nit Connection Diagram • This diagram shows connections using external output (subwoofer output). Slide the input switch to the left. • When you connect with speaker output, connections defer from the diagram. For details, see the "Using the Speaker Input" section. In either case, you need to set the input switch. For details, see the "Setting the Unit" section. Grommet Fuse (40 A) × 2 Special red battery wire [RD-228] (sold separately) After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery. Ground wire (black) [RD-228] (sold separately) Connect to metal body or chassis. Car stereo with RCA output jacks Bass Boost Remote Control Wire External Output Bass Boost Remote Control 6 m (19 ft. 8 in.) Jack for the bass boost remote control Connect this jack and the bass boost remote control with the bass boost remote control wire. Connecting wire with RCA pin plugs (sold separately). RCA input jack Amplifier with RCA input jacks Fuse (30 A) RCA output jack Speaker output terminal See the "Connecting the Speaker Wires" section for speaker connection instructions. RCA input System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power 9 terminal through the ignition switch.