Pioneer SC-89 Owner's Manual - Page 87

09 Using other functions Changing the channel level while listening Using the channel level settings, you can adjust the overall balance of your speaker system, an important factor when setting up a home theater system. 1 Press CH LV.. 2 Use i/j to select the channel you wish to adjust. 3 Adjust the volume using k/l. The volume can be adjusted in the range of -12.0dB to +12.0dB, 0.5 dB steps. 4 When you're finished, press RETURN. Input Volume Absorber This can be used to correct for the difference in volume between input sources. 1 Switch to the input whose volume you want to adjust. 2 Press CH LV.. 3 Use i/j to select 'ALL'. 4 Adjust the volume using k/l. The volume can be adjusted in the range of -12.0dB to +12.0dB, 0.5 dB steps. 5 When you're finished, press RETURN. Using the MULTI-ZONE controls The following steps use the front panel controls to adjust the sub zone volume and select sources. See ZONE 2 remote controls and HDZONE remote controls on page 88 . Important ! The settings must be changed at ZONE Setup in order to use the multi-zone function (page 112 ). 1 Press the button on the front panel for the zone you want to operate (ZONE 2 ON/OFF, ZONE 3 ON/OFF or HDZONE ON/OFF). The zone switches between on and off each time the button is pressed. The MULTI-ZONE indicator lights when the MULTI-ZONE control has been switched ON. 2 Press MULTI-ZONE CONTROL on the front panel to select the sub zone(s) you want. ! When the receiver is on, make sure that any operations for the sub zone are done while ZONE and your selected sub zone(s) show in the display. If this is not showing, the front panel controls affect the main zone only. If the receiver is in standby, the display is dimmed, and ZONE and your selected sub zone(s) continue to show in the display. 3 Use the INPUT SELECTOR dial to select the source for the zone you have selected. For example, ZONE 2 SAT/CBL sends the source connected to the SAT/CBL inputs to the primary (ZONE 2) sub room. ! If you select TUNER, you can use the tuner controls to select a preset station (see Saving station presets on page 61 if you're unsure how to do this). The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast. 4 Use the MASTER VOLUME dial to adjust the volume for the sub zone. When Speaker System is set to anything other than 5.2 +ZONE 2+ZONE 3, 5.2 +ZONE 2+HDZONE or Multi-ZONE Music, the volume output from the receiver's AUDIO ZONE 2 OUT terminals can be fixed to -40 dB or 0 dB and the volume can be adjusted from the connected amplifier. If you want to adjust the volume from the connected amplifier, see ZONE Setup on page 112 . 5 When you're finished, press MULTI-ZONE CONTROL again to return to the main zone controls. You can also press ZONE 2 ON/OFF, ZONE 3 ON/OFF or HDZONE ON/OFF on the front panel to switch off all output to the sub zone. ! You won't be able to switch the main zone off completely unless you've switched off the MULTI-ZONE control first. ! If you don't plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this receiver is in standby. Note When the network function or iPod/USB input is selected using HDZONE, the video converter function is disabled. For that reason, video connected with the video cable or component cable is not output from the HDMI terminal. Also, upscaling of the HDMI input video cannot be performed. To enable the video converter function, turn off HDZONE or set HDZONE to some other input. 87