Pioneer SDV-P7 Owner's Manual - Page 56
Troubleshooting
View all Pioneer SDV-P7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Others Troubleshooting If you think there is something wrong with the unit. Before requesting repairs, check the following chart. \ If the problem remains even after checking. Reset the unit. (See page 6.) \ If the problem still remains. Request repairs. 7 Common problems Symptom Power doesn't switch ON. The unit doesn't operate. Operation with the remote control isn't possible. The unit does not operate correctly even when the appropriate remote control buttons are pressed. Playback is not possible. There's no sound. Cause Remedy Leads and connectors are incor- Confirm once more that all con- rectly connected. nections are correct. A fuse has blown. Fix the problem causing the blown fuse, and replace the old fuse with a new one of the same capacity. Noise and other factors are caus- Press the RESET button. (See ing the built-in microprocessor page 6.) to operate incorrectly. The remote control operation mode is incorrect. Switch to the correct remote control mode. (See page 13.) The remote control code is incorrect. Make sure the remote control code selection switch setting and code type setting are the same. (Refer to pages 13 and 50). Battery power is low. Load new batteries. (See page 15.) Some operations are prohibited Check using another disc. with certain discs. The disc is dirty. Clean the disc. (See page 11.) The loaded disc is a type this unit cannot play. Check what type the disc is. Non compatible video system disc is loaded. Change to a disc compatible to your video system. Connections are incorrect. Check connections. With some discs, 96 kHz output Switch the output setting to is prohibited. 48 kHz. (See page 49.) The unit is performing Still, Slow Motion or Frame-ByFrame playback. There is no sound during Still, Slow Motion or Frame-ByFrame playback. 53