Pioneer SPH-DA02 User Manual - Page 29
Appendix - iphone cable
View all Pioneer SPH-DA02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Appendix Appendix Appendix Symptom There is no GPS signal. Cause Action (Reference) The GPS antenna is in an unsuitable The quality of signals from the GPS satellites location. is poor, causing reduced positioning accu- racy. Check the GPS signal reception and the position of the GPS antenna if necessary. Obstacles are blocking signals from The quality of signals from the GPS satellites the satellites. is poor, causing reduced positioning accu- racy. Check the GPS signal reception and the position of the GPS antenna if necessary, or continue driving until reception improves. Keep the antenna clean. The position of satellites relative to your vehicle is inadequate. The quality of signals from the GPS satellites is poor, causing reduced positioning accuracy. Continue driving until reception improves. Signals from the GPS satellites have The quality of signals from the GPS satellites been modified to reduce accuracy. is poor, causing reduced positioning accu(GPS satellites are operated by the racy. Continue driving until reception imUS Department of Defense, and the proves. US government reserves the right to distort positioning data for military reasons. This may lead to greater positioning errors.) If a vehicle phone or cellular phone is used near the GPS antenna, GPS reception may be lost temporarily. The quality of signals from the GPS satellites is poor, causing reduced positioning accuracy. When using a cellular phone, keep the antenna of the cellular phone away from the GPS antenna. Something covers the GPS antenna. Do not cover the GPS antenna with spray paint or vehicle wax, because this may block the reception of GPS signals. Snow buildup can also degrade the signals. Problems with the audio screen Symptom iPhone cannot be operated. Cause The iPhone is frozen. An error has occurred. Action (Reference) Reconnect the iPhone with the iPhone cable. ! Reconnect the iPhone with the iPhone cable. ! Press the Reset button. Problems with the phone screen Symptom Cause Action (Reference) Dialing is not possible because the touch panel keys for dialing are inactive. Your phone is out of range for ser- Retry after re-entering the range for service. vice. The connection between the iPhone Perform the connection process. and this product cannot be established now. En 29