Pioneer SW-E10 Owners Manual - Page 3
Terminology And Controls - subwoofer
View all Pioneer SW-E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
www.pioneerelectronics.com English 3 TERMINOLOGY AND CONTROLS 1 STATUS INDICATOR - The LED found on the front panel will illuminate when the subwoofer is functioning. If the unit is in AUTO mode and is not receiving a signal, the light will remain off. 2 POWER - This switch can be set to either ON, AUTO, or STANDBY. If the switch is in the ON position, it will constantly remain on. If the switch is set to the AUTO position, when a signal is present the subwoofer will turn on and will automatically turn off several minutes after a signal is no longer present. If the switch is in the STANDBY position, the subwoofer will remain OFF 3 LEVEL - This knob controls the output level (or volume) of your subwoofer. The level chosen should allow the subwoofer to blend its output with that of the rest of your audio system. 4 LOWPASS (HZ) - This control adjusts the low-pass filter, or crossover frequency. Adjustments can be made from 40 Hz to 150 Hz. This will determine the highest frequency that the subwoofer will reproduce. 5 PHASE - This control adjusts the phase of the subwoofer, in relation to the speakers used in your system, from 0 to 180 degrees. 6 LFE/LEFT INPUT - This jack is an RCA type line-level input. If you are connecting your subwoofer to an A/V receiver or surround processor with a LFE or Subwoofer preamp output, connect a single RCA cable to this input. If you are connecting your subwoofer to a stereo receiver or preamp, such as in a stereo music system, use stereo RCA cables and connect to both this jack and the RIGHT input. 7 RIGHT INPUT - This jack is an RCA type line-level input. If you are connecting your subwoofer to a stereo receiver or preamp, such as in a stereo music system, use stereo RCA cables and connect to both this input and the LFE/ LEFT input. 8 AC POWER INPUT - This is a standard IEC-type input for a 15-amp AC power cord. A cord is supplied with the subwoofer. 2 3 4 5 6 7 8 1