Pioneer SW-E10 Owners Manual - Page 6
Installation Precautions, Specifications, Cabinet Maintenance - elite powered subwoofer
View all Pioneer SW-E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6 English www.pioneerelectronics.com INSTALLATION PRECAUTIONS • Do not install this subwoofer near a stove or other heating appliance, or put it in a place exposed to the sun. Such locations may cause the cabinet to change color and the subwoofer to break down. • If the subwoofer or any other speaker is installed too close to the screen of a television set, color distortion may occur. Pioneer will not be responsible for any accidents or damage that may result from improper installation. CABINET MAINTENANCE • Use a polishing cloth or dry cloth to wipe off dust and dirt. • When the cabinet is very dirty, clean with a soft cloth dipped in some neutral cleanser diluted with six parts water to one part cleanser, and then wipe again with a dry cloth. Do not use furniture wax or cleaners. • Never use paint thinner, benzine, insecticide sprays and other chemicals on or near the cabinets, since these will corrode the surfaces SPECIFICATIONS Enclosure Frequency Range Maximum Output Power Cross-Over Frequency Finish Magnetically Shielded Dimensions without feet (W x H x D) Dimensions with feet (W x H x D) Weight (each) Power Consumption Power Requirement Woofer SW-E10 Sealed 30 Hz - 150 Hz 600 watt Peak, 300 RMS 40 Hz - 150 Hz continuously adjustable Black Vinyl No 335 mm x 335 mm x 340 mm 335 mm x 390 mm x 340 mm 34 lbs Less than .5 watts in Standby 100v - 240v 10" Complies with California Code of Regulations (CCR) 93120.2(a) Phase 2. Specifications and design subject to modification without notice. PIONEER, ELITE, the Pioneer, Elite, and A. JONES logo are registered trademarks of Pioneer Corporation.