Pioneer VSX-53 Owner's Manual - Page 83
Home Media Gallery
View all Pioneer VSX-53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Additional information 13 Symptoms Causes Remedies A USB memory device is not recognized. The USB memory device does not Try using a USB memory device compatible support the mass storage class with the mass storage class specifications. specifications. Note that there are cases where even the audio files stored on a USB memory device compatible with the mass storage class specifications are not played back on this receiver (page 31). Connect the USB memory device and switch on this receiver (page 23). A USB hub is currently being used. This receiver does not support USB hubs (page 31). This receiver recognizes the USB Switch off and on again this receiver. memory device as a fraud. A USB memory device is connected and displayed, but the audio files stored on the USB memory device cannot be played back. Some formats of USB memory devices, including FAT 12, NTFS, and HFS, cannot be played back on this receiver. Check whether the format of your USB memory device is either FAT 16 or FAT 32. Note that the FAT 12, NTFS, and HFS formats cannot be played back on this receiver (page 31). The file format cannot be properly See the list of file formats that can be played back on this receiver. played back on this receiver (page 32). Cannot detect USB keyboard. The USB keyboard is routed through a USB hub. This receiver is not compatible with USB hubs. Plug the keyboard directly into the receiver. A PS2 keyboard is routed through PS2 keyboards cannot be used with this a PS2/USB connector. receiver, even if routed through a PS2/USB connector. Use a USB keyboard. Keyboard is not a USB HID Class Some devices will not be detected. Use a device. USB HID Class keyboard. Cannot enter correct text using the USB keyboard. Keyboard is not US-international Use a US-international layout keyboard. NB: layout keyboard. Some characters cannot be entered. HOME MEDIA GALLERY Symptoms Cannot access the network. Causes Remedies The LAN cable is not firmly con- Firmly connect the LAN cable (page 22). nected. The router is not switched on. Switch on the router. Internet security software is currently installed in the connected component. There are cases where a component with Internet security software installed cannot be accessed. The audio component on the net- Switch on the audio component on the work which has been switched network before switching on this receiver. off is switched on. Symptoms Causes Remedies Playback does not start while The component is currently "Connecting..." continues to disconnected from this receiver be displayed. or the power supply. Check whether the component is properly connected to this receiver or the power supply. The PC or Internet radio is not The corresponding IP address is properly operated. not properly set. Switch on the built-in DHCP server function of your router, or set up the network manually according to your network environment (page 71). The IP address is being automati- The automatic configuration process takes cally configured. time. Please wait. The audio files stored on components on the network, such as a PC, cannot be played back. Windows Media Player 11 or Windows Media Player 12 is not currently installed on your PC. Install Windows Media Player 11 or Windows Media Player 12 on your PC (page 41). Audio files were recorded in formats other than MP3, WAV (LPCM only), MPEG-4 AAC, FLAC, and WMA. Play back audio files recorded in MP3, WAV (LPCM only), MPEG-4 AAC, FLAC, or WMA. Note that some audio files recorded in these formats may not be played back on this receiver. Audio files recorded in MPEG-4 AAC or FLAC are being played back on Windows Media Player 11 or Windows Media Player 12. Audio files recorded in MPEG-4 AAC or FLAC cannot be played back on Windows Media Player 11 or Windows Media Player 12. Try using another server. Refer to the operation manual supplied with your server. The component connected to the network is not properly operated. Check whether the component is affected by special circumstances or is in the sleep mode. Try rebooting the component if necessary. The component connected to the network does not permit file sharing. Try changing the settings for the component connected to the network. The folder stored on the component connected to the network has been deleted or damaged. Check the folder stored on the component connected to the network. Network connections could be restricted due to the computer's network settings, security settings, etc. Check the computer's network settings, security settings, etc. Cannot access the component connected to the network. The component connected to the network is not properly set. If the client is automatically authorized, you need to enter the corresponding information again. Check whether the connection status is set to "Do not authorize". There are no playable audio files on the component connected to the network. Check the audio files stored on the component connected to the network. En 83