Pioneer VSX-532 Operating Instructions - Page 21

4 Basic playback Music playback using BLUETOOTH® wireless technology You can wirelessly enjoy music files stored in a smartphone or other BLUETOOTH capable device. The coverage area is about 33 feet (10 meters). Note • The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. • The BLUETOOTH wireless technology enabled device must support A2DP profiles. • We do not guarantee proper connection and operation of this unit with all BLUETOOTH wireless technology enabled devices. Pairing with the unit (Initial registration) Pairing should be performed when first using the unit with the BLUETOOTH capable device, or when the pairing data on the device has been erased for any reason. • After pressing the BT and switching to BT Audio function, perform the pairing procedure on the BLUETOOTH capable device. If pairing has been performed correctly, you will not need to perform the pairing procedures for the unit as shown below. BD GAME TUN AUX CBL S.BOX TRE CD TV BT AUDIO USB BT PHASE S.RETRIEVER BASS 1 Press the BT. 2 Turn on the power to the BLUETOOTH capable device that you wish to pair with, and perform pairing procedure on it. • This unit will be displayed as "Pioneer VSX-532" on all BLUETOOTH capable devices that you have. Pairing will start. • Place the BLUETOOTH capable device close to the unit. • Please refer to the user's manual for your BLUETOOTH capable device for details on when pairing can be performed and the procedures required for pairing. • When PIN code entry is requested, enter "0000". (This unit does not accept any PIN code setting other than "0000".) 3 Confirm on the BLUETOOTH capable device that pairing has been completed. If pairing with the BLUETOOTH capable device has been completed correctly "CONNECT" will be displayed. Listen to music on the unit from a BLUETOOTH capable device 1 Press the BT. The unit will switch to BT Audio input. 2 A BLUETOOTH connection will be created between the BLUETOOTH capable device and the unit. Procedures for connecting to the unit should be performed from the BLUETOOTH capable device. • Please refer to the user's manual for your BLUETOOTH capable device for details of the connection procedures. 3 Playback music from the BLUETOOTH capable device. Radio wave caution This unit uses a 2.4 GHz radio wave frequency, which is a band used by other wireless systems (see list below). To prevent noise or interrupted communication, do not use this unit nearby such devices, or make sure these devices are switched off during use. • Cordless phones • Cordless facsimiles • Microwave ovens • Wireless LAN devices (IEEE802.11b/g) • Wireless AV equipment • Wireless controllers for game systems • Microwave-based health aids • Some baby monitors Other, less common, equipment that may operate on the same frequency: • Anti-theft systems • Amateur radio stations (HAM) • Warehouse logistic management systems • Discrimination systems for train or emergency vehicles Note • In the event noise appears in your television image, there is the possibility that a BLUETOOTH wireless technology enabled device or this unit (including products supported by this unit) are causing signal interference with the antenna input connector of your television, video, satellite tuner, etc. In this event, increase the distance between the antenna input connector and the BLUETOOTH wireless technology enabled device or this unit (including products supported by this unit). • If there is something obstructing the path between this unit (including devices supported by this unit) and the device equipped with BLUETOOTH wireless technology (such as a metal door, concrete wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interruptions. 2 4 33 Scope of operation Use of this unit is limited to home use. (Transmission distances may be reduced depending on communication environment). 21