Pioneer VSX-56TXi Owner's Manual - Page 60

Press Multi Operation.

Get Pioneer VSX-56TXi PDF manuals and user guides View all Pioneer VSX-56TXi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

08 Controlling other equipment 4 Use / (cursor up/down) to select a command in the sequence then press ENTER. If this is the first command in the sequence, select 1st Cmmnd. Otherwise, simply choose the next command in the sequence. 5 To add (or change) a command select 'Change' and press ENTER. Function flashes in the display. • To erase a command select Clear and press ENTER. You will return to the last step. • To go back a step, select *Exit* and press ENTER. 6 Press the MULTI CONTROL button for the component whose command you want to input. Key flashes in the display. 7 Select the button for the command you want to input. The following remote control commands can be selected: 8 Repeat steps 4-7 to program a sequence of up to five commands. • You don't need to program the receiver to switch on or off. This is done automatically. With Pioneer components, you don't need to: • program the power to switch off in a shutdown sequence; • program the power to switch on if it's the source component selected in step 3; • program a Pioneer TV or monitor to switch on if the input function (selected in step 2) has video input terminals; These take priority in multi operations (not shutdown). 9 When you're finished, use / (cursor up/down) to select '*Exit*' from the menu and press ENTER. You will return to the REMOTE SETUP menu. Select *Exit* again to exit. Using multi operations You can start multi operations with the receiver switched on, or in standby. SOURCE TV DIMMER LOUDNESS 1 2 TONE EFFECT/CHSEL 3 4 SIGNAL SEL 5 DNR BASS/TREBLE + 6 7 8 VIDEO SEL 9 SYSTEM SETUP MENU TUNER EDIT AUDIO HI-BIT +10 DISC 0 ENTER DIRECT ACCESS SEARCH MODE GUIDE TOP MENU ENTER TRACK EXIT RETURN MPX TUNING DTV ON/OFF BAND DISP MODE SUB TITLE TUNING + STATION DTV MENUCLASS STATION + CHANNEL CHANNEL+ + TV INPUT TV CONTROL + TV VOL TV CH MIDNIGHT MULTI DH INPUT STEREO/ DIRECT SB CH MODE DVD/LD TV/SAT VCR1 / DVR MULTI CONTROL VCR2 VIDEO CD TV CONT MULTI OPERATION CD-R/ TAPE1 MD/ TAPE2 TUNER 1 Press MULTI OPERATION. Select Function flashes in the display. 2 Press a function button that has been set up with a multi operation. The receiver switches on (if it was in standby) and the programmed multi operation is performed automatically. • After selecting a command, COMPLETE appears in the display. 60 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Controlling other equipment
08
60
En
4
Use
²/³
(cursor up/down) to select a command
in the sequence then press ENTER.
If this is the first command in the sequence, select
1st
Cmmnd
. Otherwise, simply choose the next command in
the sequence.
5
To add (or change) a command select ‘Change’
and press ENTER.
Function
flashes in the display.
•
To erase a command select
Clear
and press
ENTER
.
You will return to the last step.
•
To go back a step, select
*Exit*
and press
ENTER
.
6
Press the MULTI CONTROL button for the
component whose command you want to input.
Key
flashes in the display.
7
Select the button for the command you want to
input.
The following remote control commands can be
selected:
•
After selecting a command,
COMPLETE
appears in
the display.
8
Repeat steps 4–7 to program a sequence of up to
five commands.
•
You don't need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components
, you don’t need to:
•
program the power to switch off in a shutdown
sequence;
•
program the power to switch on if it’s the source
component selected in step 3;
•
program a Pioneer TV or monitor to switch on if the
input function (selected in step 2) has video input
terminals;
These take priority in multi operations (not shutdown).
9
When you’re finished, use
²/³
(cursor up/down)
to select ‘*Exit*’ from the menu and press ENTER.
You will return to the
REMOTE SETUP
menu. Select
*Exit*
again to exit.
Using multi operations
You can start multi operations with the receiver switched
on, or in standby.
1
Press MULTI OPERATION.
Select Function
flashes in the display.
2
Press a function button that has been set up with
a multi operation.
The receiver switches on (if it was in standby) and the
programmed multi operation is performed automatically.
SOURCE
DIMMER
LOUDNESS
TONE
SIGNAL SEL
DNR
DISC
1
5
9
0
6
7
8
3
4
2
BASS/TREBLE
VIDEO SEL
HI-BIT
DIRECT ACCESS
SEARCH MODE
ENTER
GUIDE
SYSTEM
SETUP
TUNER
EDIT
MPX
TUNING
BAND
DTV ON/OFF
DISP MODE
TUNING
STATION
DTV MENU CLASS
STATION
CHANNEL
SUB TITLE
ENTER
TOP MENU
MENU
AUDIO
RETURN
TRACK
EXIT
+
10
+
+
+
CHANNEL
+
EFFECT/CH SEL
TV
TV
VOL
TV CONTROL
TV CH
TV INPUT
MIDNIGHT
MULTI DH
INPUT
SB CH
MODE
STEREO/
DIRECT
+
+
DVD/LD
VCR2
VIDEO
CD
TV/SAT
TV CONT
MULTI
CONTROL
VCR1 /
DVR
CD-R/
TAPE1
MD/
TAPE2
MULTI
OPERATION
TUNER