Pioneer VSX-D411 Owner's Manual - Page 36

07 Using the tuner Naming station presets For easier identification, you can name your station presets. 1 Choose the station preset you want to name. See Listening to station presets (this page) for how to do this. 2 If you're using the remote control, press RECEIVER. 3 Press TUNER EDIT. The display shows ST. NAME, then a blinking cursor at the first character position. 4 Input the name you want. Names can be up to four characters long. • Use the MULTI JOG/INPUT SELECTOR dial (front panel) or the STATION +/- buttons (remote) to select characters. • Press ENTER to confirm a character. If no character is input, a space is input. • The name is stored when ENTER is pressed after choosing the fourth character. Listening to station presets Having stored up to 30 stations (see previous page), preset stations can be easily recalled. 1 Press TUNER (remote) or use the MULTI JOG dial on the front panel to select the tuner. 2 Press CLASS to select the class in which the station is stored. Press repeatedly to cycle through classes A, B and C. 3 Press STATION +/- to select the station preset you want. • If the receiver is left disconnected from the AC power outlet for an extended period, the station memories will be lost and will have to be reprogrammed. To erase a station name, simply repeat steps 1-3 and input four spaces instead of a name. Once you have named a station preset, you can press DISPLAY when listening to a station to switch the display between the name and the frequency. 36 En