Pioneer VSX-D909S Owner's Manual - Page 77
Video Select
View all Pioneer VSX-D909S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Using Other Functions Video Select This function allows you to listen to one sound source while you watch a different video source on your TV. The sound source is set in the normal fashion as is explained on p.45.You then alter the video input with the VIDEO SELECT button. AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D909S Digital Signal Processor STANDBY/ON STANDBY DSP MODE STEREO/ DIRECT /DTS SIGNAL SELECT ADVANCED STANDARD MULTI-ROOM &SOURCE CONTROL PHONES S-VIDEO VIDEO INPUT VIDEO L AUDIO R MULTI CH INPUT CHANNEL TONE SELECT DIGITAL LOUDNESS NR FL DIMMER CLASS BAND - TUNING + SPEAKERS - BASS + - TREBLE + VIDEO TAPE 2 SELCT MONITOR MPX TUNER CONTROL MEMORY - STATION + DOWN INPUT SELECTOR MASTER VOLUME UP VIDEO SELECT Press the VIDEO SELECT button on the front panel to cycle through the different possible video inputs. The first press shows the video input you are currently using. After that pressing VIDEO SELECT cycles though the possibilities in the following order: DVD/LD ( OFF ) VCR1 TV/SAT VCR2 VIDEO The OFF setting means the AUDIO and VIDEO source are the same. (Also, if one of the MD/TAPE 1, CD, TUNER, or PHONO functions are selected the VIDEO SELECT will be set to OFF.) After choosing a video input the display on the receiver will show that input for about 5 seconds and then revert to showing the sound mode the receiver is in. The VIDEO SELECT remains set to the input you chose until you change the audio input. If you change audio functions the receiver will reset itself to make the video and audio inputs correspond. Also, if you switch the power of the receiver OFF when you turn it back on the video and audio inputs will reset so that they correspond. OPERATION 77