Pioneer VSX-LX303 Instruction Manual English - Page 10
Front Panel, Remote
View all Pioneer VSX-LX303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. ANTENNA AM LOOP/FM UNBAL 75Ω terminal: The supplied antennas are connected. 3. COMPONENT VIDEO IN jacks: Input the AV component video signals with a component video cable. (Compatible only with 480i or 576i resolution.) 4. USB port: A USB storage device is connected so that music files stored in it can be played. ( p68) You can also supply power (5 V/500 mA) to USB devices with a USB cable. 5. VIDEO IN jacks: Input the AV component video signals with an analog video cable. 6. NETWORK port: Connect to the network with a LAN cable. 7. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status. 8. RS-232C port: Connect a home control system equipped with an RS-232C port. For adopting a home control system, contact the specialized stores. 9. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a monitor such as a TV or projector. 10. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to an AV component. 11. AC IN: The supplied power cord is connected. 12. SIGNAL GND terminal: The ground wire of the turntable is connected. 13. AUDIO IN jacks: Input AV component audio signal with an analog audio cable. 14. IR IN/OUT port: Connect a remote control receiver unit.( p56) 15. 12V TRIGGER OUT A/B jack: Connect a device equipped with a 12V trigger input jack to enable power link operation between the device and this unit. ( p57) 16. SPEAKERS terminals: Connect speakers with speaker cables. (North American models support banana plugs.) 17. SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks. 18. ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio cable to a premain amplifier or a power amplifier in a separate room (ZONE 2). 10 Front Panel≫ Rear Panel≫ Remote≫