Pioneer VSX-LX303 Instruction Manual English - Page 110
Audio Adjust
![]() |
View all Pioneer VSX-LX303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Adjust Dual Mono / Mono Change the settings of multiplex audio playback. Setting Item Dual Mono Mono Input Channel Default Value Main Left + Right Setting Details Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. "Main": Main channel only "Sub": Sub channel only "Main/Sub": Main and sub channels are output at the same time. • For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit's display. Set the input channel to play 2-ch digital sources such as Dolby Digital, or 2-ch analog/PCM sources in the Mono listening mode. "Left": Left channel only "Right": Right channel only "Left + Right": Left and right channels Dolby Change the setting of when Dolby signals are input. Setting Item Loudness Management Default Value On Volume Change the Volume settings. Setting Details When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the DRC function that allows you to enjoy surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD. "On": When this function is used "Off": When this function is not used Setting Item Mute Level Default Value -∞dB Volume Limit Off Power On Level Last Headphone Level 0.0 dB Setting Details Set the volume lowered from the listening volume when muting is on. Select a value from "-∞dB", "-40dB" and "-20dB". Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", "-32 dB" to "+17 dB". Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "-∞ dB", and "-81.5 dB" to "+18.0 dB". • You cannot set a higher value than that of "Volume Limit". Adjust the output level of headphones. Select a value between "-12.0 dB" and "+12.0 dB". 110 Front Panel≫ Rear Panel≫ Remote≫
![](/manual_guide/products/pioneer-vsxlx303-instruction-manual-english-d0f5209/110.png)