Pioneer VSX-S520 Instruction Manual - Page 50

> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Auto Standby Auto Standby in HDMI Standby Through USB Power Out at Standby Network Standby This setting places the unit on standby automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" or "Network Standby" is on, this becomes the HYBRID STANDBY mode which reduces the increase in power consumption to a minimum.) "On": The unit will automatically enter standby mode ("ASb" will stay lit). "Off": The unit will not automatically enter standby mode. 0 "Auto Standby" is displayed on the display of this unit and TV screen 30 seconds before the Auto Standby comes on. 0 Default values vary depending on the regions. Enable or disable "Auto Standby" while "HDMI Standby Through" is on. "On": The setting will be enabled. "Off": The setting will be disabled. 0 This setting cannot be set to "On" if "Auto Standby" is set to "Off". Devices connected to the USB port are supplied with electricity even when this unit is in standby mode when this function is "On". (Default Value is "Off") 0 When using this feature, power consumption increases even when the unit is on standby, however, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only essential circuits are operating. When this feature is turned "On (Default Value)", you can turn on the power of the unit via the network using an application that can control this unit. 0 When "Network Standby" is used, the power consumption increases even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. 0 "Network Standby", which suppresses power consumption, may be disabled when the network connection is lost. Use the power button on the remote controller or this unit to turn the unit on if this happens. Bluetooth Wakeup This function wakes up the unit on standby by connecting a E BLUETOOTH enabled device. N "On": Use this function "Off (Default Value)": Do not use this function 0 Setting to "On" increases the power consumption even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. 0 This setting is fixed to "Off" if "Network/Bluetooth" - "Bluetooth" - "Auto Input Change" (P56) is set to "Off". 0 Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear when the network feature is started. Miscellaneous FM Frequency Step (North American models) DAB Auto Scan (VSX-S520D) DAB DRC (VSX-S520D) ■ Tuner Select a frequency step depending on your area of residence. Select "0.2 MHz (Default Value)" or "0.05 MHz". 0 When this setting is changed, all radio presets are deleted. You can run the auto scan when new DAB stations are added or when you move house. With the DRC (Dynamic Range Control) setting, you can reduce the dynamic range of DAB digital radio so that you can still hear quiet parts even when listening at low volume levels - ideal for listening to the radio late at night when you don't want to disturb anyone. "Off (Default Value)" : DRC off "Large" : Large reduction in dynamic range "Small" : Small reduction in dynamic range 49