Pioneer VSX-S520 Instruction Manual - Page 56

> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others MAC Address DHCP IP Address Subnet Mask Gateway DNS Server Proxy URL Proxy Port Friendly Name This is the MAC address of this unit. This value is specific to the component and cannot be changed. "Enable (Default Value)": Auto configuration by DHCP "Disable": Manual configuration without DHCP If selecting "Disable", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server" manually. Displays/Sets the IP address. Displays/Sets the subnet mask. Displays/Sets the gateway. Displays/Sets the primary DNS server. Displays/Sets the proxy server URL. Displays/Sets the proxy server port number when you enter "Proxy URL". Change the device name for this unit which is shown on other devices connected to the network to an easily recognized name. This is set to Pioneer VSX-S520D or Pioneer VSX- S520 at the time of purchase. (" " stand for alphanumeric characters identifying each unit) 1. Press ENTER to display the Edit screen. 2. Select a character or symbol with the cursors and press ENTER. Repeat it to input 31 or less characters. "A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases.) " " " ": Moves the cursor to the arrow direction. " ": Removes a character on the left of the cursor. " ": Enters a space. 0 Pressing CLEAR on the remote controller will remove all the input characters. 3. After inputting, select "OK" with the cursors and press ENTER. The input name will be saved. AirPlay Password Usage Data Network Check You can set a password of up to 31 characters so that only E registered users can use AirPlay. N 1. Press ENTER to display the Edit screen. 2. Select a character or symbol with the cursors and press ENTER. Repeat it to input 31 or less characters. "A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases.) " " " ": Moves the cursor to the arrow direction. " ": Removes a character on the left of the cursor. " ": Enters a space. 0 To select whether to mask the password with " " or display it in plain text, press +Fav on the remote controller. 0 Pressing CLEAR on the remote controller will remove all the input characters. 3. After inputting, select "OK" with the cursors and press ENTER. The input password will be saved. As a means of improving the quality of our products and services, our company may collect information about your usage over the network. Select "Yes" if you agree to our collecting this information. Select "No" if you do not want us to collect this information. (Default Value is "No") You can set this after confirming the Privacy Policy. When you select "Usage Data" and press ENTER, the Privacy Policy is displayed. (The same screen is displayed once also when setting up the network connection.) If you agree to the collection of the information, this setting also becomes "Yes". Note that if you agree to the Privacy Policy but select "No" for this setting, the information will not be collected. You can check the network connection. Press ENTER when "Start" is displayed. 0 Wait for a while if "Network" cannot be selected. It will appear when the network feature is started. 55