Pioneer XDV-P6 Owner's Manual - Page 40

Section 10 Setting up the DVD player 4 Click the joystick. This enters the code number, and you can now change the level. # If you input an incorrect code number, the icon is displayed. Press C and input the correct code number. # If you forget your code number, refer to If you forget your code number on this page. 5 Move the joystick left or right to select the desired level. 6 Click the joystick. The parental lock level is set. Note Pressing RETURN takes you back to the previous display. 1 Move the joystick up or down to select DIGITAL OUTPUT in the GEN. DIGITAL OUTPUT is highlighted. 2 Click the joystick. Digital output setting menu is displayed. 3 Move the joystick up or down to select the desired digital output setting. The currently set digital output setting is indicated with blue box. The digital output setting selected with the joystick is highlighted. ! STREAM - The Dolby Digital signal is output as it is (initial setting) ! LPCM - The Dolby Digital signal is converted to and output as a linear PCM signal 4 Click the joystick. The selected digital output setting is set. If you forget your code number Refer to Changing the level on the previous page, and press C 10 times. The registered code number is canceled, letting you register a new one. Notes ! Linear PCM output of DTS audio is not possible. If you select LPCM, DTS audio is not output. ! When using an amplifier and decoder that are not Dolby Digital compatible, select LPCM. Setting for digital output Set digital output correctly to match the components you are using with this unit. There is no need to change settings if this unit is not connected for digital output. ! When using this unit with a Pioneer multi- channel processor (DEQ-P8000), select STREAM. Important Incorrect setting may result in noise and damage to speakers so be sure to read the manuals of the connected components. Setting digital and analog audio output You can set linear PCM audio output for both digital and analog output. Set audio output correctly to match the components you are using with this unit. ! When using digital connections, select 48KHz. ! When using analog connections, select 96KHz. 40 En