Pioneer XDV-P6 Owner's Manual - Page 41
Setting up the DVD player
UPC - 012562802381
View all Pioneer XDV-P6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setting up the DVD player Important If the setting is incorrect there will be no sound so be sure to read the manuals of the connected components. 1 Move the joystick up or down to select OUTPUT SELECTION in the GEN. OUTPUT SELECTION is highlighted. 2 Click the joystick. Audio output setting menu is displayed. 3 Move the joystick up or down to select the desired audio output setting. The currently set audio output setting is indicated with blue box. The digital output setting selected with the joystick is highlighted. ! 48KHz - A 48 kHz signal is output regardless of the audio sampling frequency. A 96 kHz signal is converted to a 48 kHz signal. (initial setting) ! 96KHz - The signal is output with the same frequency as the audio sampling frequency. With a 96kHz signal, you can enjoy exceptionally high sound quality. 4 Click the joystick. The selected audio output setting is set. Notes ! With discs featuring 96 kHz recording, if you select 96KHz, audio is not output from digital output. ! With discs that do not feature a CSS (Content Scrambling System) copy guard signal, a 96 kHz digital signal is output. ! When using this unit with a Pioneer multichannel processor (DEQ-P8000), select 48KHz. If you select 96KHz, no sound will be output when playing discs featuring 96 kHz recordings. Section 10 En 41 Setting up the DVD player