Pioneer XW-LF1-L Operating Instructions - Page 23
Remove the battery and, disconnect the connectors., Use a piece of adhesive tape to, tape
View all Pioneer XW-LF1-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English Français Español LFA_En.fm 23 3 Remove the battery and disconnect the connectors. Battery Connector Tips • Insert the Flat-head (-) screwdriver between the unit and the battery and remove the lithium-ion battery. When doing this, be careful not to damage the lithium-ion battery with the Flat-head (-) screwdriver. • When disconnecting the connectors, try to hold them as close to the base as possible. 4 Use a piece of adhesive tape to tape the battery connector to the side of the battery. Adhesive tape Caution -Do not remove any of the battery's vinyl plastic covering. -Do not cut the battery's wire or connector. -Do not attempt to disassemble the battery. -If the battery's metallic terminal becomes exposed, cover it entirely in electrical insulating tape. • When disposing of the other parts of the device, follow all local community rules and ordinances regarding disposal. • When disposing of used batteries, please comply with governmental regulations or environmental public institution's rules that apply in your country/Area. Tips • To avoid short circuit accidents, cover the entire connector with adhesive tape and fasten it to the battery's body. 23 En