Pioneer dvr 106 Owner's Manual - Page 8
Rear View - specifications
View all Pioneer dvr 106 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INTERFACE REAR VIEW MASTER SLAVE CABLE SELECT ANLOG AUDIO C S M 39 S L A 40 IDE INTERFACE DC INPUT 1 2 5V G G 12V 67 8 9 6 Audio Output This is a connector for output of analog audio. This connector is compatible with `Molex 70553`, choose a suitable connection cable. Pin Name Function 1 L Left channel audio output. 2 G Ground. 3 G Ground. 4 R Right channel audio output. 7 Device Configuration Jumper Switch becomes ON when short socket is put. Make sure the power of the drive is off before changing jumper setting. Pin # 1 is ON at the time of shipping from the plant. Pin Name Function 1 MA on The drive is used in master mode. 2 SL on The drive is used in slave mode. 3 CS on Using Cable Select function. 4 Reserved. 5 Reserved. 8 Host IDE Interface This is a 40 pin I/O connector according to the ATA specifications. 9 DC Input Pin Name 1 +12 2 G 3 G 4 +5 Function Power supply input for DC +12 V. Ground. Ground. Power supply input for DC +5 V. 8 En