Pioneer dvr 106 Owner's Manual - Page 9

Installation - manual

Get Pioneer dvr 106 - DVD±RW Drive - IDE PDF manuals and user guides View all Pioneer dvr 106 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

English INSTALLATION 1 Turn off the power of the personal computer and remove the power cord from the AC outlet, then remove the cover or the front panel. 2 Remove the blank panel installed on the front of the 5.25 inch slot. 3 Install the fixing slide rails on the drive. (When slide rails are required, please contact your shop or the computer manufacturer.) 4 Insert the drive into the slot. 5 When fixing is required, please refer to the instruction manual for the computer. ÷ Please use screws with a length of 5 mm (3/16 in.) or less for mounting. Using longer screws may cause damage on the drive. ÷ When the mounting screws are loose etc., the vibrations from disc rotation may generate ripping noise, to prevent it the screws should be tightened securely. 9 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
9
English
En
1
Turn off the power of the personal computer and remove the power cord from the
AC outlet, then remove the cover or the front panel.
2
Remove the blank panel installed on the front of the 5.25 inch slot.
3
Install the fixing slide rails on the drive. (When slide rails are required, please contact
your shop or the computer manufacturer.)
4
Insert the drive into the slot.
5
When fixing is required, please refer to the instruction manual for the computer.
÷
Please use screws with a length of 5 mm (3/16 in.) or less for mounting. Using
longer screws may cause damage on the drive.
÷
When the mounting screws are loose etc., the vibrations from disc rotation may
generate ripping noise, to prevent it the screws should be tightened securely.
INSTALLATION