Plantronics BackBeat 903 User Manual - Page 18

are the problem, or my - problems

Page 18 highlights

Troubleshooting Callers cannot hear me. Mute may be turned on. See page 9. Your headphones are out of Bluetooth range (33 feet/10 meters). Move closer to the Bluetooth device. If your headphones do not automatically reconnect, see page 5. Be sure your headphones are paired with the audio device. See page 5. Play and Pause are out of sync Ensure that your headphones are in play mode, and then initiate play between my headphones and mode from your audio source. my audio source. My earbuds need to be cleaned. Remove the earbuds from the headphones. Wash the earbuds with warm soapy water, and rinse thoroughly. When the earbud are completely dry, reattach them to your headphones. See page 7. None of the above issues are the problem, or my headphones still don't work. Perform a system reset: While plugging in the AC charger, hold the power/pair button. The headphones will show a solid red or blue light when they have been successfully reset. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

16
Troubleshooting
Callers cannot hear me.
Mute may be turned on. See page 9.
Your headphones are out of Bluetooth range (33 feet/10 meters). Move
closer to the Bluetooth device. If your headphones do not automatically
reconnect, see page 5.
Be sure your headphones are paired with the audio device. See page 5.
Play and Pause are out of sync
between my headphones and
my audio source.
Ensure that your headphones are in play mode, and then initiate play
mode from your audio source.
My earbuds need to be
cleaned.
Remove the earbuds from the headphones. Wash the earbuds
with warm soapy water, and rinse thoroughly. When the earbud are
completely dry, reattach them to your headphones. See page 7.
None of the above issues
are the problem, or my
headphones still don’t work.
Perform a system reset: While plugging in the AC charger, hold the
power/pair button. The headphones will show a solid red or blue light
when they have been successfully reset.