Plantronics Blackwire 700 Blackwire 710/720 User Guide - Page 11

Placing a call with your headset and Bluetooth mobile phone Place a call Dial number on your mobile phone keypad. Redial last number* Double press mobile talk button. There will be a double low tone on each press. A low-low-high tone indicates the last number has been redialed. Activate voice dialing* Press and hold mobile talk button for two seconds. You will hear a tone followed by a second tone which indicates voice dial is activated. * Only available on mobile phones that support these features. Answering and ending calls with your headset and Bluetooth mobile phone Answer a call Short press mobile talk button. Answer a call when already on Short press the PC talk button to end the PC softphone call. Then press an active PC softphone call the mobile talk button to answer the mobile phone call. End a call Short press mobile talk button. Reject a call Press mobile talk button for two seconds until you hear a second long single low tone. Transfer a call from your While on a call, press the mobile talk button for two seconds until you mobile phone to your headset hear a single tone followed by a long low tone. Transfer a call from your While on a call, press the mobile talk button two seconds until you hear a headset to your mobile phone long low tone followed by low-low-high tones. Or if using smart sensors, remove the C710/C720 headset to transfer audio to your mobile phone. * Only available on mobile phones that support this feature. Mobile talk button behavior with PC and mobile connected (not on a call) Redials last number on mobile phone* Double press the mobile talk button. Starts voice dialing on mobile phone* Press the mobile talk button for 2 seconds. * Only available on mobile phones that support this feature. NOTE For call control and other features, download Plantronics Spokes software at plantronics.com/software. Mobile talk button LED indicators Incoming call Rapid flash blue Active call Slow flash blue Media audio Slow flash blue Pairing mode Flash red and blue Powering on Solid blue (two seconds) Power off Solid red (two seconds) 11