Plantronics Blackwire 700 Blackwire 710/720 User Guide - Page 16

Headset controls, indicators and voice prompts Action LED Tone Voice prompt Incoming PC call N/A alert Rapid green flash Programmable N/A ringtone PC Call answer/end Short press PC Talk button Short green flash Answer: Single low N/A tone followed by lowlow-high tones End: Single low tone PC Call "Flash" Two second Press Short green flash Low Tone N/A PC Talk Button Adjust the listen Press volume up/ Single PC LED volume (during a call) volume down bar flash Tone at each change N/A in volume. Double tone when min/max volume level reached Muting your microphone Press and release On: Mute LED On On: Low-High Tones On: "Mute On" Mute Button Off: Mute LED Off Off: High-Low Tones Off: "Mute Off" Mobile (Bluetooth) Press Mobile Power on/off Talk button for 5 seconds On: solid blue for N/A 2 seconds Off: solid red for 2 seconds On: "Power on" followed by "Phone Connected", "No Phone is connected", or "Pairing". Off: "Power off" Check if Mobile Short press Mobile Short blue flash Short Low Tone N/A (Bluetooth) is Talk button powered on Incoming Mobile N/A call alert Rapid blue flash Programmable N/A ringtone Mobile Call answer/end Short press Mobile Short blue flash Talk button Answer: Single low N/A tone followed by lowlow-high tones End: Single low tone Reconnect Mobile Short press Mobile Single blue flash Phone after leaving Talk button range for more than 30 seconds Single low tone "Phone connected" Mobile redial last number * Double Press Two blue flashes Two low tones N/A Mobile Talk button followed by low-low- high tones Mobile Activate Voice Dialing * Press and hold Single blue flash Short low tone, N/A Mobile Talk button followed by long low for 2 seconds tone 16