Plantronics CS55 User Guide - Page 5
minimum - headset
UPC - 017229119970
View all Plantronics CS55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SETUP - HANDSET LIFTER (Optional) 1 2 A BCD 1. Plug handset lifter power cord into handset lifter jack on base. Push firmly into base. 2. Position handset lifter under the handset on your phone. Verify that the lifter is located on top of the telephone speaker. If not, you will need to attach the ringer microphone as described on page 22. NOTE: Remove only a tiny piece of mounting tape backing to temporarily stick lifter into position; you may need to move it later. 3 IntelliStand™ off IntelliStand on 3 Set the IntelliStand switch to Intellistand off ( ) Iinf ytoeulliStand want lifter wtoitchotnhteroclatlhlecohonaftnfrdosl et button on your headIsnette. lliStand on 3 IntelliStand 1 off 2 3 Set t4 he Intellistand switch to Intellistand on ( ) IifnytoeulliStand want the matically hpaicnkdsueptwtohoeannutyoo-u take the headset off the charging cradle. 1 2 3 4 CHARGING 1 2 • 20 minutes = minimum charge to continue setup • 3 hours = full charge 1. Slide headset into charging cradle. 2. Gently press down on the headset to ensure that headset is in correct position. Amber charge indicator light on base will flash while charging and will change to solid amber when fully charged. POSITIONING 12" 6" The minimum recommended separation distance is shown above. IMPORTANT: Incorrect positioning can cause noise and interference problems. 8 9