Plantronics M3000 User Guide - Page 16

Plantronics Ltd - Released Making and Accepting Calls To accept an in-coming call via the M3000 Headset 1. An in-coming call will cause both the phone and the headset to ring. Note that there may be a delay of a few seconds between the phone ringing and the headset starting to ring. 2. When you hear the ringing tone in the M3000 headset, press the "Call Control" button to answer the call. If you press the "Call Control" button before the headset starts to ring, the call may not be answered and an error tone will sound in the headset. Once you hear this tone you can then press the "Call Control" button to pick up the call. To end a call via the M3000 Headset The call can be ended either by pressing "Call End" on the P800 or by pressing the "Call Control" button on the M3000. To place a call using the keypad: 1. Dial the number as normal and press the "Call" key on the P800. 2. Press the "Call Control" button on the M3000 to transfer the sound to the headset. To place a call using Voice Dialing with the M3000 Headset: NB: Before using the M3000 for voice dialling, ensure that you have followed the instructions in the Sony Ericsson P800 User Guide for voice dialling, and that you have recorded the names of the contacts you wish to call via voice dialling. Place a test call from the P800 using voice dialling to ensure that it is working before using the M3000 headset. 1. Press the "Call Control" button on the M3000, you hear a beep in the headset. After a moment you will hear another beep in the headset as a prompt for voice dialling and the phone display will show "Sound Transferred to Headset" 2. State the name of the contact you wish to dial and the call will be placed. P800 M3000 pair rev001 2 3rd July 2003