PlayStation 97060 Instruction Manual - Page 12

Connecting digital audio equipment By using a commercially available optical digital cable, you can enjoy surround sound with the effect of being in a movie theatre or a concert hall. When connecting the console to audio equipment with digital connectors, refer to the instructions supplied with the device to be connected. Console rear Connecting the controller 1 Insert the Analog Controller (DUALSHOCK®2) into a controller port of the console. MEMORY CARD Console front Connected device DIGITAL IN OPTICAL Commercially available optical digital cable Notes • If you connect the console to audio equipment using an optical digital cable, it may affect the audio output of some PlayStation®2 format software with the result that no sound is produced. If this happens, use a cable such as the supplied AV Cable (integrated audio/video) and connect it to the console's AV MULTI OUT connector. Do not use an optical digital cable. • After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the System Configuration menu. For details, see "Digital Out (Optical)" ( page 37). Analog Controller (DUALSHOCK®2) Note Some software titles designate a specific controller port to be used. Refer to the instructions supplied with the software for details. 12 Connecting digital audio equipment