PlayStation SCPH-7501 Service Manual - Page 3

Reproduction Prohibited SECTION 1 SPECIFICATIONS SCPH-9000 SERIES SCPH-9000 General Power requirements 100 V AC, 50/60 Hz Power consumption 9 W Dimensions 270 × 60 × 188 mm (w/h/d) Mass 1.2 kg Laser diode properties • Material : GaAlAs • Wavelength : 1 = 780 nm • Emission duration : Continuous • Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block) Inputs/ Outputs on the front Controller ports (2) Memory card slots (2) Inputs/Outputs on the rear Serial I/O port (1) Outputs on the rear AV Multi out port Supplied accessories AC power cord (1) A/V connecting cable (1) Analog controller (1) Instruction manual (1) SCPH-9001 General Power requirements 120 V AC, 60 Hz Power consumption 17 W Dimensions 270 × 60 × 188 mm (w/h/d) Mass 1.3 kg Laser diode properties • Material : GaAlAs • Wavelength : 1 = 780 nm • Emission duration : Continuous • Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block) Inputs/ Outputs on the front Controller ports (2) Memory card slots (2) Inputs/Outputs on the rear Serial I/O port (1) Outputs on the rear AV Multi out port (1) Supplied accessories AC power cord (1) A/V connecting cable (1) Analog controller (1) Instruction manual (1) SCPH-9002/A/B/C General Power requirements 220-240 V AC, 50 Hz Power consumption 10 W Dimensions 270 × 60 × 188 mm (w/h/d) Mass 1.2 kg Laser diode properties • Material : GaAlAs • Wavelength : 1 = 780 nm • Emission duration : Continuous • Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block) Inputs/ Outputs on the front Controller ports (2) Memory card slots (2) Inputs/Outputs on the rear Serial I/O port (1) Outputs on the rear AV Multi out port (1) Supplied accessories AC power cord (1) A/V connecting cable (1) (except for the SCPH-9002B) Analog controller (1) Instruction manual (1) RFU adaptor (1) (for SCPH-9002B) AV-connector plug (1) (for SCPH-9002C) SCPH-9003 General Power requirements 110-240 V AC, 50/60 Hz Power consumption 11 W Dimensions 270 × 60 × 188 mm (w/h/d) Mass 1.2 kg Laser diode properties • Material : GaAlAs • Wavelength : 1 = 780 nm • Emission duration : Continuous • Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block) Inputs/ Outputs on the front Controller ports (2) Memory card slots (2) Inputs/Outputs on the rear Serial I/O port (1) Outputs on the rear AV Multi out port (1) Supplied accessories AC power cord (1) A/V connecting cable (1) Analog controller (1) Adapter Conversion 2P (1) Instruction manual (1) Design and specifications are subject to change without notice. - 2 -