Polaroid FCM-0700A User Manual - Page 18

TV Function The auto memory will take a few minutes. The unit will search channels from the lowest channel to the highest channel in the standard channel list. When tuning operations are complete the unit will exit and store the channels by sequence in the memory. During tuning, press the ◄ button to exit the auto memory. Use the CHANNEL +/- or ▼, ▲ direction buttons to select the desired channel from those in memory. Timer Setup Press the SET button on the remote control to enter Timer setup menu, the screen will display as below: Timer Power on Power off Signal Channel TIMER SET OFF _ _: _ _ am _ _: _ _ am CATV 002 Exit : SET Use the ▼, ▲ buttons to select the item you want to set. Use the ►, ◄ buttons to enter the item and to select. Press the SET button again on the remote control to exit from the setup menu. Timer Use the ►, ◄ direction buttons to select ON or OFF. This function allows you to set the start time and end time of the desired signal source. Whether the player is under TV, radio or standby mode, If set this function on, the player will automatically start the playback of the desired signal source. Select ON to activate the function; select OFF to disable the function. Power on To set the playback start time of the signal source. Use number buttons to input the desired start time in sequence of hour, minute. Press the ►, ◄ direction buttons to shift between am and pm. - 18 -