Polaroid XS80 User Guide - Page 13
Joint Socket. Assure that the Mount-Lock
View all Polaroid XS80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
POLAROID XS80 USER GUIDE 10. Attach the Mount-Lock and camera into the Ball Joint Socket. Assure that the Mount-Lock Ball Joint Nut is tightened securely. 11. The ball joint system allows you to change the angle of the camera . Simply loosen the nut, adjust the camera angle and re-tighten the nut. Tips for Achieving a Secure Mounting When straps are not practical, the adhesive pads can be used to attach the mount to smooth surfaces like a motorcycle helmet. And don't worry about the adhesive ruining the helmet; they're removed quite easily when heat is applied (eg. a hairdryer) . For best results, maximum adhesion of the adhesive pad is achieved by first cleaning the helmet surface thoroughly where the pad will be attached. Apply the pad firmly and allow it to remain unused overnight. The dry time allows the adhesive to create a stronger bond. For ultimate camera support, use the straps and the 3M® adhesive pads. 13