Polaroid XS80 User Guide - Page 4

POLAROID XS80 USEH GUIDE Charging the Battery 1. Connect the USB cable's mini USB plug into the camera's mini USB port. 2. Connect the cable's USB plug into a USB port of any computer. Verify that the computer is on. 3. The Red LED remains on while the battery is charging . 4. The Red LED will turn off when the battery is fully charged. 5. Charge the battery before using the camera for the very first time. 6. 6. It takes about 3 hours to initially charge the camera . Subsequent charges will take 3 hours or less. Additional lnfonnation When the battery power is low, the camera will vibrate three times to indicate a low battery. The camera will vibrate two seconds to indicate it's out of power. If the camera is recording, it will automatically save the file and then shut down. DO NOT attempt to remove the internal battery. Doing so will void the warranty coverage and can possibly damage the camera . Inserting a Micro SO Card The XS80 supports MicroSD cards up to 128GB (Class 6 or greater cards are recommended). MicroSD card in the camera, the Red and Green LED will flash alternately and continuously. If there is no Check that the camera power is turned OFF Insert a MicroSD card into the MicroSD Card Slot with enough finger pressure to keep the edge of the card flush with the card slot opening. Never force MicroSD into slot, there is only one correct way to insert it. To remove the Micro-SO card, press the card inward and release. Grasp the card with two f ingers and pull it out. A new MicroSD card should be formatted before using . 4