Polk Audio CSW155 CSW100, 155, 200, SWA500 Cut Sheets - Page 9

Specifications CSW200 shown with aftermarket 12" x 12" floor grate. PERFORMANCE DRIVER COMPLEMENT SINGLE LONG-THROW KLIPPEL-ANALYZED 10-INCH DRIVER POWER HANDLING (WATTS) 250 CONTINUOUS OVERALL FREQUENCY RESPONSE LOWER -3DB LIMIT UPPER -3DB LIMIT 22HZ-140HZ 28HZ 120HZ NORMAL IMPEDANCE 8 OHMS CONNECTIONS SPEAKER WIRE MAXIMUM WIRE SIZE ACCOMMODATED 12 AWG MINIMUM RECOMMENDED 18 AWG INPUT CONNECTORS HEAVY-DUTY SPRING LOADED PUSH TERMINALS, ONE PAIR PER SIDE IMPORTANT NOTE: The CSW200 is equipped with two sets of binding posts for installing convenience. Use either set to hook up the subwoofer to the amplifier. Do not use both sets. Always use one set. Recommended Configuration Use dedicated SWA500 amplifier to achieve optimal performance as recommended by Polk Audio (see note on SPEX Cards under SWA500). Factory Support For product support, contact our service department at 1-800-377-7655 9am to 6pm EST, Monday-Friday, or contact Customer Service at [email protected] For more information on the CSW200 and specific installation procedures, log onto http://www.polkaudio.com/downloads/manuals/home/CSW100_200_Manual.pdf 9 Polk Audio Custom Install Product: CSW200 www.PolkAudio.com / 800.377.7655 (USA & Canada) / 410.358.3600 (Worldwide) 9