Poulan 968999302 User Manual - Page 43

Replacing the Fuel Filter, Checking Tire Pressures, Checking the Parking Brake

Get Poulan 968999302 PDF manuals and user guides View all Poulan 968999302 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

MAINTENANCE Replacing the Fuel Filter Replace the line-mounted fuel filter every 100 hours (once per season) or more regularly if it is clogged. Replace the filter as follows: 1. Move the hose clamps away from the filter. Use flat-nosed pliers. 2. Pull the filter loose from the hose ends. 3. Push the new filter into the hose ends. Position the filter with the "FLOW" arrow pointing up toward the carburetor. If necessary, a soap solution can be applied to the filter ends to ease mounting. 4. Move the hose clamps back toward the filter. Fuel filter Checking Tire Pressures All four tires should have a pressure of 15 psi / 103 kPa /1 bar. 8009-405 Checking the Parking Brake Visually check that no damage is found on the lever, linages, or switch belonging to the parking brake. Perform a stand still test and check that there is a braking action. To adjust the parking brake, contact the Poulan service workshop. WARNING! Faulty adjustment can cause an accident. Tire pressures 8011-564 IMPORTANT INFORMATION The parking brake is a mechanical latch brake and must not be applied when the mower is moving. English-41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
English-
41
MAINTENANCE
Replacing the Fuel Filter
Replace the line-mounted fuel filter every
100 hours (once per season) or more
regularly if it is clogged.
Replace the filter as follows:
1.
Move the hose clamps away from the
filter. Use flat-nosed pliers.
2.
Pull the filter loose from the hose ends.
3.
Push the new filter into the hose ends.
Position the filter with the ”FLOW” arrow
pointing up toward the carburetor. If
necessary, a soap solution can be
applied to the filter ends to ease
mounting.
4.
Move the hose clamps back toward the
filter.
Checking Tire Pressures
All four tires should have a pressure of
15 psi / 103 kPa /1 bar.
Checking the Parking Brake
Visually check that no damage is found on
the lever, linages, or switch belonging to the
parking brake. Perform a stand still test and
check that there is a braking action.
To adjust the parking brake, contact the
Poulan service workshop.
8009-405
Fuel filter
8011-564
Tire pressures
IMPORTANT INFORMATION
The parking brake is a mechanical latch
brake and must not be applied when the
mower is moving.
WARNING!
Faulty adjustment can cause
an accident.