Poulan GTT354 User Manual - Page 4
Know Your Grass Catcher, Parts, Identification, Unpacking Instructions, Carton Contents, Tools
View all Poulan GTT354 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
KNOW YOUR GRASS CATCHER READTHIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATINGYOUR GRASS CATCHER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tractor and while mowing. We recommend a wide vision safety mask for over the spectacles or standard safety glasses. 00155 UNPACKING INSTRUCTIONS • Remove all parts and packing materials from carton. • Check carton contents against list. Be sure all parts are there. TOOLS REQUIRED FOR ASSEMBLY - (1) 5/8" Wrench (for changing Blades) PARTS IDENTIFICATION CARTON CONTENTS: (3) Container Tops (3) Container Bottoms (1) Upper Chute (1) Lower Chute (1) Cover Assembly (3) BLADES SUPPORT ASSEMBLY Marked "A" SUPPORT ASSEMBLY Marked "B" COVER ASSEMBLY RETAINER SPRING FULL BAG INDICATOR CHUTE LATCH 03021 GRASS CATCHER CONTAINERS UPPER CHUTE LOWER CHUTE LOWER CHUTE ATTACHING STRAPS NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position. CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift/motion control lever in "NEUTRAL" position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key "OFF" and remove key. • Make sure the blade and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 4