Poulan GTT354 User Manual - Page 7
Lower Chute See Fig. 6, Upper Chute, See Figs. 7a & 7b, Level Mower - bagger
View all Poulan GTT354 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
6 LOWER CHUTE (See Fig. 6) 1. Raise and hold deflector shield in upright position. 2. Place slot in lower chute over tab on mower and position lower chute over mower opening as shown. 3. Hook rear latch into flange hole on back of mower. 4. Hook front latch into hole in front gauge wheel bracket or under gauge wheel bracket on mower without a hole in bracket. CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation. DEFLECTOR SHIELD 7 UPPER CHUTE (See Figs. 7A & 7B) 1. Lower mower to its lowest cutting position. 2. Assemble upper chute by inserting curved end into hole in back of cover. NOTE: Handle carefully so as not to damage full bagger indicator. 3. Push in and turn upper chute until it is in line with lower chute. 4. Align the bosses on lower chute with alignment slots on upper chute and slide together. 5. Secure with rubber latch by hooking hole in latch over latch pin. COVER UPPER CHUTE FULL BAGGER INDICATOR HANDLE LOWER CHUTE 03029 TAB FIG. 7A ALIGNMENT SLOT LATCH PIN 02783 REAR LATCH GUAGE WHEEL BRACKET FRONT LATCH 03023 RUBBER LATCH BOSSES FIG. 7B 8 LEVEL MOWER • Be sure mower is properly leveled for best mower performance. See your tractors owner's manual for instructions FIG. 6 7