Poulan HDR500E User Manual - Page 7
Connect, Shift, Remove, Tiller, Crate, Attach, Clutch, Cable, Check, Pressure, Handle, Height
View all Poulan HDR500E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY CONNECT SHIFT ROD (See Fig. 6) • Insert end of shift rod into hole of shift lever indicator. • Insert hairpin clip through hole of shift rod to secure. SHIFT ROD HAIRPIN CLIP SHIFT LEVER INDICATOR ATTACH CLUTCH CABLE (See.Fig. 7) • Hook end,of clutclicable through hole in control bar bracket. END OF CLUTCH CABLE CONTROL BAR BRACKET r N CONTROL BAR BRACKET FIG. 6 REMOVE TILLER FROM CRATE • Make sure shift lever indicator is in "N" position (See Fig. 6) • Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield. • Rotate tiller handle to the right and pull tiller out of carton. CONTROL BAR CLUTCH CABLE FIG. 7 CHECK TIRE PRESSURE The tires on your unit were overinflated at the factory for shipping purposes. Correct and equal tire pressure is important for best tilling performance. • Reduce tire pressure to 20 PSI (1.4 kg/cm2). HANDLE HEIGHT • Handle height may be adjusted to better suit operator. (See "TO ADJUST HANDLE HEIGHT" in the Service and Adjustments section of this manual). 7