Poulan HDR500H User Manual - Page 7
Attach, Clutch, Cable, Connect, Shift, Remove, Tiller, Crate, Check, Pressure, Handle, Height
View all Poulan HDR500H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY ATTACH CLUTCH CABLE (See Fig. 6) • Hook end of clutch cable through hole in control bar bracket if necessary. END OF CLUTCH CABLE CONTROL BAR BRACKET CONTROL BAR BRACKET REMOVE TILLER FROM CRATE • Make sure shift lever indicator is in "N" position (See Fig. 7) • Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield. • Rotate tiller handle to the right and pull tiller out of carton. CHECK TIRE PRESSURE The tires on your unit were overinflated at the factory for shipping purposes. Correct and equal tire pressure is important for best tilling performance. • Reduce tire pressure to 20 PSI (1.4 kg/cm2). HANDLE HEIGHT • Handle height may be adjusted to better suit operator. (See "TO ADJUST HANDLE HEIGHT" in the Service and Adjustments section of this manual). ?i iCiTI TROL CLUTCH CABLE FIG. 6 CONNECT SHIFT ROD (See Fig. 7) • Insert end of shift rod into hole of shift lever indicator. • Insert hairpin clip through hole of shift rod to secure. SHIFT ROD HAIRPIN CLIP SHIFT LEVER INDICATOR .ct F N FIG. 7 7