Poulan P54ZX Owner Manual - Page 20

MAINTENANCE, Maintenance Schedule - parts list

Page 20 highlights

MAINTENANCE Maintenance Schedule Following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by an authorized service workshop is recommended to maintain your machine in the best possible condition and to make sure of safe operation. Read General Maintenance in the Safety section. MAINTENANCE DAILY BEFORE AFTER AT LEAST ONCE EACH YEAR MAINTENANCE INTERVAL IN HOURS 25 50 100 300 CHECK Park brake for adjustment ● Engine's oil level (each refueling) ■ Safety system ● For fuel and oil leakages ♦ For damage ♦ For loose hardware (screws, nuts) ♦ For mower deck damage ♦ Tire pressures Battery connections CLEAN Below the mower deck ● Around the engine ♦ Around belts, belt pulleys ♦ Engine's cooling air intake 2) Air cleaner foam pre-filter 2) Air cleaner paper filter cartridge 2) 4) ALSO Inspect muffler/spark arrestor Start the engine & blades, listen for unusual sounds ♦ Sharpen 3) / Replace mower blades ♦ ♦♦♦ ●● ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engine manufacturer's manual 1) First change after 8-10 hours. When operating with a heavy load or at high ambient temperatures, replace at 50 hour intervals. 2) In dusty conditions, cleaning and replacement are required more frequently. 3) Performed by authorized service workshop. 4) If equipped. WARNING! Before performing service or adjustment: • Engage the park brake. • Place the blade switch in the disengaged position. • Turn the ignition switch to OFF position and remove the key. • Make sure the blades and all moving parts have completely stopped. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Maintenance Schedule
Following is a list of maintenance procedures
that must be performed on the machine. For
those points not described in this manual, visit an
authorized service workshop. An annual service
MAINTENANCE
DAILY
AT LEAST
ONCE
EACH
YEAR
MAINTENANCE INTERVAL
IN HOURS
BEFORE
AFTER
25
50
100
300
CHECK
Park brake for adjustment
Engine’s oil level (each refueling)
Safety system
For fuel and oil leakages
For damage
For loose hardware (screws, nuts)
For mower deck damage
Tire pressures
Battery connections
CLEAN
Below the mower deck
Around the engine
Around belts, belt pulleys
Engine’s cooling air intake
2)
Air cleaner foam pre-filter
2)
Air cleaner paper filter cartridge
2)
4)
ALSO
Inspect muffler/spark arrestor
Start the engine & blades,
listen for unusual sounds
Sharpen
3)
/ Replace mower blades
carried out by an authorized service workshop is
recommended to maintain your machine in the
best possible condition and to make sure of safe
operation.
Read
General Maintenance
in the
Safety
section.
= Described in this manual
= Not described in this manual
= Refer to the engine manufacturer’s manual
1)
First change after 8-10 hours. When
operating with a heavy load or at high ambient
temperatures, replace at 50 hour intervals.
2)
In dusty conditions, cleaning and replacement
are required more frequently.
3)
Performed by authorized service workshop.
4)
If equipped.
WARNING
!
Before performing service or
adjustment:
• Engage the park brake.
Place the blade switch in the disengaged
position.
• Turn the ignition switch to OFF position and
remove the key.
• Make sure the blades and all moving parts
have completely stopped.
20
MAINTENANCE