Poulan PBGT22H54 User Manual - Page 7
See Figs. 4-12, Assemble Front Wheel To, Mower See Fig. 3
View all Poulan PBGT22H54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY ASSEMBLE FRONT WHEEL TO MOWER (See Fig. 3) • Using shoulder bolt, washer and locknut from parts bag, assemble front wheel to mower as shown.Tighten securely. 02051 FIG. 3 INSTALL MOWER AND DRIVE BELT (See Figs. 4-12) See MOWER AND DRIVE BELT ASSEMBLY Supplement Sheet for additional guidance on this assembly. Be sure tractor is on level surface and engage parking brake. • Lower attachment lift lever to it's lowest position. CAUTION:Lift lever is spring loaded.Have a tight grip on lift lever, lower it slowly and engage in lowest position. • Turn steering wheel to the left as far as it will go and position mower on right side of tractor with deflector shield to the right. A FIG. 5 NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. • Slide mower under tractor until it is centered under tractor. • FIRST INSTALL ANTI-SWAY BAR (S). - From right side of mower, insert anti-sway bar into hole in transmission bracket (T). T S A 02995 FIG. 6 - Pivot bar towards you and insert other end of bar into hole in rear mower bracket (D). Move mower as needed to insert bar. - Secure with washer and retainer spring as shown using small 5/16 retainer spring. D 02965 FIG. 4 • Remove plastic tie securing belt, bring belt forward and check belt for proper routing in all mower pulley grooves. 02996 FIG. 7 7