Poulan PLN3516F User Manual - Page 11
Operating, Instructions
View all Poulan PLN3516F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3-6. SELECTING THE PROPER EXTENSION CORD FOR YOUR SAW MODEL Saw Model PLN3516F Ampere Rating 13.5 Minimum Gauge Wire Volts AC Length of Power Cord 25 ft. / 7.5m 50 ft. / 15m 100 ft. /30m 120 16 Gauge 16 Gauge 14 Gauge 1. The extension cord is to be for outdoor use, marked with the suffix W or W-A following the cord type designation, for example - SJTW or SJTW-A. 2. Make sure the extension cord is in good condition before using. 3. Keep the cord away from the cutting area and to position cord so that it will not be caught on branches, and the like, during cutting. 4 - OPERATING INSTRUCTIONS 4-1. TO START SAW 1. Make sure the CHAIN BRAKE® IS DISENGAGED.The motor will not start if the CHAIN BRAKE® is in the ENGAGED position. Disengage the CHAIN BRAKE® by pulling backward toward the motor (Figure 4-1A). WARNING Ensure the extension cord is of the proper size and type for your saw. 2. An extension cord retainer (A) (Fig. 4-18) is built into the rear handle that prevents the extension cord from pulling out of the handle, To use this feature, simply double the extension cord, about a foot from the end, and insert it through the hole at the end of the handle. Hook the loop formed by doubling the cord over the tab. Gently tug on the cord to ensure that it is firmly retained in the saws handle. Plug the receptacle end of the extension cord into the tool's power supply cord. WARNING Make sure the extension cord does not come in contact with the guide bar and saw chain. 3. Grip the saw with both hands, left hand holding the front handle (DO NOT HOLD CHAIN BRAKE®) and the right hand holding the rear handle. Thumbs and fingers should encircle both handles (Figure 4.1C). 4. With your RIGHT THUMB, depress the LOCK/OFF button (C) on the top of the rear handle, and at the same time squeeze the trigger. To stop the saw, release the trigger (Figure 4-1D). NOTE: It is not necessary to maintain pressure on the LOCK/OFF button once the trigger is squeezed and the motor is running. The LOCK/OFF button is a safety device to avoid accidental starting. 4-1A A 4-113 1,7 4-1C • c•N ittAei,,r z. 4-1D 11