Poulan PPB330 User Manual - Page 15
Position the lines in the guide slots.
View all Poulan PPB330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4. Replace with a pre-wound spool, or replace line using a 25 feet (8 meters) length of 0.080 inch (2 mm) diameter Poulan PRO brand line. WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile. 5. When installing new line on an existing spool, hold the spool as shown. 6. Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot. 9. Place the spool in the cover as shown below. Slot 10. Insert the ends of the lines through exit holes in the sides of the cover. Line exit hole Cover 7. With your finger between the lines, wrap the lines evenly and firmly around the spool in a clockwise direction. 11. Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place. 8. Position the lines in the guide slots. Guide slot Guide slot 15