Poulan PPB4020M Owner Manual - Page 8
Assembly
View all Poulan PPB4020M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ASSEMBLY UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. • If any parts are damaged or missing, please call 1-855-378-6903 for assistance. PACKING LIST • 40V 20" Dual Blade Mower • Mulching Plug • Grass Catcher Bag • 40V 2Ah Battery (PPB402AH) • 40V 4Ah Battery (PPB404AH) • 40V Charger • Owner's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Using a product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not insert battery until assembly is complete and you are ready to mow. Failure to comply could result in accidental starting and possible serious personal injury. uNFOLDING AND ADJUSTING HANDLE ASSEMBLY RAISING THE HANDLE ASSEMBLY • Open the lower handle locks (1). • Pull up and back on the lower handle until it is aligned with the slot between the handle locks and the mower housing. NOTE: If the lower handle is difficult to move, turn the lower handle locks counterclockwise to free the handle. • To secure the lower handle in place, close the lower handle locks. NOTE: If the lower handle is loose or does not seat completely in the slot, turn the lower handle locks clockwise to secure the handle. • Open the upper handle locks (2). • Pull up and back on the upper handle to raise it into operating position. Make sure that the lower handle is seated in the grooves at the bottom of the upper handle. • To secure the upper handle in place, close the upper handle locks. NOTE: If the upper handle is loose or separated from the lower handle, tighten the knobs on the upper handle locks by turning them clockwise. 2 Close Open 1 Open Close WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts. WARNING: Never operate the mower without the proper safety devices in place and working. Never operate the mower with damaged safety devices. Operation of this product with damaged or missing parts could result in serious personal injury. LOWERING THE HANDLE ASSEMBLY • Open the upper handle locks. NOTE: If the handle lock is difficult to open, loosen the knobs on the upper handle locks by turning them counterclockwise. • Lower the upper handle. • Open the lower handle lock (1). • Push outward on each side of the lower handle (2) until it is free from the slot. Then, fold the handle to the front of the unit. Avoid pinching or trapping any cables. 7