Poulan PR46BT Owner Manual - Page 11

Be aware of the wind direction. Work with the wind

Page 11 highlights

SAFETY INSTRUCTIONS To avoid holding your finger on the throttle all the time when using the blower, the required throttle can be set with the cruise control (D). Full throttle is obtained when the throttle trigger is pushed in or the cruise control is pushed down fully. D • Check that the air intake is not blocked, for example, by leaves or rubbish. A clogged air intake reduces the machine's blowing capacity and increases the engine's working temperature, which can result in engine failure. Stop the engine and remove the object. • Be aware of the wind direction. Work with the wind to make your work easier. • Using the blower to move large piles is time consuming and creates unnecessary noise. • Keep a good balance and a firm foothold. • When work is finished the machine should be stored vertically. English - 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

SAFETY INSTRUCTIONS
English
11
To avoid holding your finger on the throttle all the time
when using the blower, the required throttle can be set
with the cruise control (D). Full throttle is obtained when
the throttle trigger is pushed in or the cruise control is
pushed down fully.
Check that the air intake is not blocked, for example,
by leaves or rubbish. A clogged air intake reduces the
machine’s blowing capacity and increases the
engine’s working temperature, which can result in
engine failure. Stop the engine and remove the object.
Be aware of the wind direction. Work with the wind to
make your work easier.
Using the blower to move large piles is time
consuming and creates unnecessary noise.
Keep a good balance and a firm foothold.
When work is finished the machine should be stored
vertically.
D