Poulan PR625Y22RHP Owner Manual - Page 36

continued

Get Poulan PR625Y22RHP PDF manuals and user guides View all Poulan PR625Y22RHP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

TROUBLESHOOTING (continued) See appropriate section in manual unless directed to an authorized Service Center. PROBLEM CAUSE CORRECTION Grass catcher 1. Cutting height too low. not filling 2. Lift on blade worn off. (If so equipped) 3. Catcher not venting air. 1. Raise cutting height. 2. Replace blade. 3. Clean grass catcher. Hard to push 1. Grass is too high or wheel height is too low. 2. Rear of lawn mower housing or cutting blade dragging in grass. 3. Grass catcher too full. 4. Handle height position not right for you. 1. Raise cutting height. 2. Raise rear of lawn mower housing one (1) setting higher. 3. Empty grass catcher. 4. Adjust handle height to suit. Loss of drive or slowing of drive speed 1. Belt wear. 1. Check/replace drive belt. 2. Belt off of pulley. 2. Check/reinstall drive belt. 3. Drive cable worn or broken. 3. Replace drive cable. 4. "Loose" drive control system. 4. Adjust drive control.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Grass catcher
1.
Cutting height too low.
1. Raise cutting height.
not filling
2. Lift on blade worn off.
2. Replace blade.
(If so equipped)
3. Catcher not venting air.
3. Clean grass catcher.
Hard to push
1. Grass is too high or wheel
1. Raise cutting height.
height is too low.
2. Rear of lawn mower
2. Raise rear of lawn mower
housing or cutting blade
housing one (1) setting
dragging in grass.
higher.
3. Grass catcher too full.
3. Empty grass catcher.
4. Handle height position not
4. Adjust handle height to suit.
right for you.
Loss of drive
1. Belt wear.
1. Check/replace drive belt.
or slowing of
2. Belt off of pulley.
2. Check/reinstall drive belt.
drive speed
3. Drive cable worn or broken.
3. Replace drive cable.
4. “Loose” drive control system.
4. Adjust drive control.
PROBLEM
CAUSE
CORRECTION
See appropriate section in manual unless directed to an authorized
Service Center.
TROUBLESHOOTING
(continued)