Poulan QCR3897 User Manual - Page 5

ASSEMBLY 1 BAGGER SUPPORT ASSEMBLY (See Fig. 1A) 1. Your tractor already has four (4) shoulder bolts installed on the rear drawbar, simply hang the support assembly on the bolts. SUPPORT ASSEMBLY SHOULDER BOLTS 2 MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY (See Fig. 2) NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to tractor. 1. Position cover assembly on ground behind tractor as shown. 2. Lift and rotate cover to align cover bracket with support assembly. 3. Slide cover assembly down onto the support assembly. COVER ASSEMBLY 02645 FIG. 1A TO REMOVE THE SUPPORT ASSEMBLY (See Fig. 2) 1. Pull outward on the stop bracket enough to allow support assembly to be lifted up and away from drawbar. PULL OUT ON STOP BRACKET TO REMOVE SUPPORT ASSEMBLY SUPPORT ASSEMBLY 02643 FIG. 1B 02646 5 FIG. 2