Poulan QCR3897 User Manual - Page 7
Upper Chute, See Figs. 6a & 6b, Fig. 6a, Fig. 6b, Level Mower Deck, Attach Lower Chute See Fig. - mowers
![]() |
View all Poulan QCR3897 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5 ATTACH LOWER CHUTE (See Fig. 5) 1. Raise and hold deflector shield in upright position. 2. Place slot in lower chute over tab on mower deck and position lower chute over deck opening as shown. 3. Hook rear latch into flange hole on back of mower deck. 4. Hook front latch into tab hole on front of mower deck. CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation. 6 UPPER CHUTE (See Figs. 6A & 6B) 1. Lower mower deck to its lowest cutting position. 2. Assemble upper chute by inserting curved end into hole in back of cover. NOTE: Handle carefully so as not to damage full bagger indicator. 3. Push in and turn upper chute until it is in line with lower chute. 4. Align the bosses on lower chute with alignment slots on upper chute and slide together. 5. Secure with rubber latch by hooking hole in latch over latch pin. FULL BAGGER HANDLE INDICATOR COVER DEFLECTOR SHIELD 02099 TAB UPPER CHUTE LOWER CHUTE 02924 02098 FRONT LATCH Fig. 6A ALIGNMENT SLOTS LATCH PIN BOSSES Fig. 6B RUBBER LATCH REAR LATCH FIG. 5 7 LEVEL MOWER DECK Be sure deck is properly leveled for best mower performance. See your tractors owner's manual for instructions. 7
![](/manual_guide/products/poulan-qcr3897-user-manual-ae602df/7.png)