Poulan QCT348 User Manual - Page 5
Drawbar A See Figs. 1a, 1b & 1c, Bagger Support Assembly, Drawbar B See Fig. 1d
View all Poulan QCT348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY 1 BAGGER SUPPORT ASSEMBLY Determine which type drawbar you have on your tractor. Compare the drawbar illustrations below to the drawbar located at the rear of your tractor. Follow the support assembly instructions that apply to your type drawbar. 3. Align support assembly pin with hole in drawbar and hang assembly over the shoulder bolts. 4. Be sure support assembly is seated properly and secure with retainer spring supplied. SHOULDER BOLTS SUPPORT ASSEMBLY 02531 02530 DRAWBAR A DRAWBAR B DRAWBAR A (See Figs. 1A, 1B & 1C) 1. Remove and discard the upper bolt on both sides of the drawbar. Using the same holes, install the shoulder bolts supplied and tighten securely. REMOVE AND DISCARD UPPER BOLTS AND INSTALL SHOULDER BOLTS SUPPLIED PIN RETAINER SPRING FIG. 1C DRAWBAR B (See Fig. 1D) 1. Discard adapters provided - not required for drawbar type B. 2. Align support assembly pin with hole in drawbar and hang assembly over the shoulder bolts. 3. Be sure support assembly is seated properly and secure with retainer spring supplied. SHOULDER BOLTS FIG. 1A DRAWBAR 2. Install adapter to both sides of support assembly as shown. FIG. 1B SUPPORT ASSEMBLY ADAPTER 3064 PIN RETAINER SPRING FIG. 1D 5