Poulan QCT348 User Manual - Page 7

Lower Chute See Fig. 5, Level Mower Deck, Container Mounting See Fig. 4, Upper Chute, See Figs. 6a & - bagger

Page 7 highlights

4 CONTAINER MOUNTING (See Fig. 4) 1. Install one container to left side first with warning to outside of unit. Install another container to center position and one in right position. NOTE: Right container should always overlap left container at center supports. 2. Close cover and lock latch handles over center support tubes. COVER LATCH HANDLES CONTAINER WARNING 6 UPPER CHUTE (See Figs. 6A & 6B) 1. Lower mower to its lowest cutting position. 2. Assemble upper chute by inserting curved end into hole in back of cover. NOTE: Handle carefully so as not to damage full bagger indicator. 3. Push in and turn upper chute until it is in line with lower chute. 4. Align the bosses on lower chute with alignment slots on upper chute and slide together. 5. Secure with rubber latch by hooking hole in latch over latch pin. CENTER SUPPORT TUBES CONTAINER 03022 HANDLE FIG. 4 csDWruoabcAnjekoecRttdotNooprewIdrNaeatameGr amagnoedwdde. erUtuisenerlieoosrnaslytcioaonnr.etaCcihonemecrmkisebpnardgoepfdreerrqelyupiselannctsleytma. lRelenedtp.cClaoocnnettaawinihneeernr. is csDWruoabcAnjekoecRttdotNooprewIdrNaeatameGr amagnoedwdde. erUtuisenerlieoosrnaslytcioaonnr.etaCcihonemecrmkisebpnardgoepfdreerrqelyupiselannctsleytma. lRelenedtp.cClaoocnnettaawinihneeernr. is CONTAINER WARNING 5 LOWER CHUTE (See Fig. 5) 1. Raise and hold deflector shield in upright position. 2. Place slot in lower chute over tab on mower deck and position lower chute over deck opening as shown. 3. Hook rear latch into flange hole on back of mower deck. 4. Hook front latch into tab hole on front of mower deck. CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation. DEFLECTOR SHIELD OPTIONAL FRONT GAUGE WHEEL COVER UPPER CHUTE FULL BAGGER INDICATOR HANDLE LOWER CHUTE 03029 FIG. 6A ALIGNMENT SLOT LATCH PIN 03023 RUBBER LATCH BOSSES FIG. 6B 02552 FIG. 5 TAB FRONT LATCH REAR LATCH 7 LEVEL MOWER DECK Be sure deck is properly leveled for best mower performance. See your tractors owner's manual for instructions. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

7
02552
LOWER CHUTE (See Fig. 5)
1.
Raise and hold deflector shield in upright position.
2.
Place slot in lower chute over tab on mower deck and
position lower chute over deck opening as shown.
3.
Hook rear latch into flange hole on back of mower
deck.
4.
Hook front latch into tab hole on front of mower deck.
5
CAUTION: Do not remove deflector
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
REAR LATCH
FRONT
LATCH
DEFLECTOR
SHIELD
FIG. 5
LEVEL MOWER DECK
Be sure deck is properly leveled for best mower performance.
See your tractors owner's manual for instructions.
7
TAB
OPTIONAL FRONT
GAUGE WHEEL
WARNING
WARNING
03022
CONTAINER MOUNTING (See Fig. 4)
1.
Install one container to left side first with warning to
outside of unit. Install another container to center
position and one in right position.
NOTE
: Right container should always overlap left container
at
center supports.
2.
Close cover and lock latch handles over center support
tubes.
4
FIG. 4
COVER LATCH
HANDLES
CONTAINER
WARNING
CONTAINER
HANDLE
CONTAINER
WARNING
CENTER
SUPPORT
TUBES
03029
UPPER CHUTE
(See Figs. 6A & 6B)
1.
Lower mower to its lowest cutting position.
2.
Assemble upper chute by inserting curved end into
hole in back of cover.
NOTE
: Handle carefully so as not to damage full bagger
indicator.
3.
Push in and turn upper chute until it is in line with lower
chute.
4.
Align the bosses on lower chute with alignment slots
on upper chute and slide together.
5.
Secure with rubber latch by hooking hole in latch over
latch pin.
6
COVER
HANDLE
LOWER
CHUTE
FULL BAGGER
INDICATOR
UPPER
CHUTE
FIG. 6B
FIG. 6A
03023
BOSSES
LATCH PIN
ALIGNMENT
SLOT
RUBBER
LATCH