Poulan XT22H48YT User Manual - Page 18
Service And Adjustments
![]() |
View all Poulan XT22H48YT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
SERVICE AND ADJUSTMENTS CAUTION: After rear lift links are disconnected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever. • Turn tractor steering wheel to the left as far as it will go. • Slide mower out from under right side of tractor. TO INSTALL MOWER (See Figs. 18-22) Be sure tractor is on level surface and engage parking brake. • Lower attachment lift lever to it's lowest position. CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position. • Turn steering wheel to the left as far as it will go and position mower on right side of tractor with deflector shield to the right. A B FIG. 18 • ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring. • Repeat on opposite side of tractor. C D 02051 02965 A 02965 NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. • Slide mower under tractor until it is centered under tractor. • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring. • Repeat on opposite side of tractor. FIG. 19 • Turn steering wheel to position wheels straight forward. • ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F) and secure with retainer spring (G) through hole in link located behind the bracket. • Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J). E H J F G FIG. 20 18
![](/manual_guide/products/poulan-xt22h48yt-user-manual-6f0a0c2/18.png)